Bicycle chain slipping teeth can be treated by the following methods:
1. Adjust the transmission: First check whether the transmission is adjusted correctly. If the transmission is improperly adjusted, it may cause excessive friction between the chain and the gears, causing tooth slipping. You can try adjusting the position of the transmission to make sure it meshes properly with the gears.
2. Replace the chain: If the chain is severely worn, it may cause insufficient friction between the chain and the gears, causing tooth slipping. You can try replacing the chain with a new one to make sure it provides enough friction.
3. Replace the flywheel: If the flywheel is severely worn, it may cause insufficient friction between the chain and the gear, causing tooth slipping. You can try replacing the flywheel with a new one to make sure it provides enough friction.
4. Adjust the position: If the bicycle has been used for a long time and one end of the chain hole is worn, you can open the joint, turn it around, and change the inner ring of the chain into an outer ring. The damaged side will not be in direct contact with the large and small gears so that it will not slip. .
Post time: Dec-01-2023