News
-
What is the difference between a bush chain and a roller chain?
In terms of power transmission, different types of chains are used to transmit mechanical power from one place to another. Two common types of chains used in these applications are sleeve chains and roller chains. Although they may look similar at first glance, there are some noticeable differenc...Read more -
What is the operation of a roller chain?
When it comes to mechanical power transmission, roller chains are vital components and play a vital role in ensuring smooth and efficient operation of various industrial applications. In this blog, we’ll take a closer look at the inner workings of roller chains, their operation, and their importa...Read more -
What is the difference between a roller chain and a link chain?
When it comes to choosing the right type of chain for your industrial or mechanical needs, understanding the differences between a roller chain and a link chain is crucial. While both chains are used for similar purposes, they have distinct features and functions that set them apart. In this blog...Read more -
How to disassemble roller chain
The main methods for disassembling roller chains are as follows: Use the chain tool: Align the locking part of the chain tool with the locking position of the chain. Use the knob to push the pin on the tool out of the pin on the chain to remove the chain. Use a wrench: If you don’t have a ...Read more -
What are the main failure modes of chain drives?
The main failure modes of chain drives are as follows: (1) Chain plate fatigue damage: Under the repeated action of the loose edge tension and tight edge tension of the chain, after a certain number of cycles, the chain plate will undergo fatigue damage. Under normal lubrication conditions, the f...Read more -
Why are the number of links in a chain always an even number?
Since the allowable range of the center distance of the chain drive, both in design calculation and debugging in actual work, provides generous conditions for the use of even-numbered chains, the number of links is generally an even number. It is the even number of the chain that makes the sprock...Read more -
What are the joint forms of roller chains?
The joint forms of roller chains mainly include the following: Hollow pin joint: This is a simple joint form. The joint is realized by the hollow pin and the pin of the roller chain. It has the characteristics of smooth operation and high transmission efficiency. 1 Plate connection joint: It con...Read more -
How to install excavator chain
Process: First loosen the screw holding the butter, release the butter, use a sledgehammer to knock down the loose pin, lay the chain flat, then use a hook bucket to hook up one side of the chain, push it forward, and use a stone Pad the other end. Press the good eye with a bucket and smash the l...Read more -
How to calculate the speed of chain drive?
The formula is as follows:\x0d\x0an=(1000*60*v)/(z*p)\x0d\x0awhere v is the speed of the chain, z is the number of chain teeth, and p is the pitch of the chain. \x0d\x0aChain transmission is a transmission method that transmits the movement and power of a driving sprocket with a special tooth sha...Read more -
What is the appropriate motorcycle chain?
1. Adjust the transmission chain of the motorcycle. First use the main bracket to support the bike, and then loosen the screws of the rear axle. Some bikes also have a large nut on the flat fork on one side of the axle. In this case, the nut must also be tightened. loose. Then turn the chain adju...Read more -
Why can’t chain drive be used in rapid reverse transmission?
The radius of the crankset should be increased, the radius of the flywheel should be reduced, and the radius of the rear wheel should be increased. This is how today’s geared bicycles are designed. The chain drive is composed of main and driven sprockets mounted on parallel axes and an annu...Read more -
How to know the chain specifications and models
1. Measure the pitch of the chain and the distance between the two pins. 2. Inner section width, this part is related to the thickness of the sprocket. 3. The thickness of the chain plate to know whether it is reinforced type. 4. The outer diameter of the roller, some conveyor chains use large ro...Read more
