News
-
How to calculate the speed of chain drive?
The formula is as follows:\x0d\x0an=(1000*60*v)/(z*p)\x0d\x0awhere v is the speed of the chain, z is the number of chain teeth, and p is the pitch of the chain. \x0d\x0aChain transmission is a transmission method that transmits the movement and power of a driving sprocket with a special tooth sha...Read more -
What is the appropriate motorcycle chain?
1. Adjust the transmission chain of the motorcycle. First use the main bracket to support the bike, and then loosen the screws of the rear axle. Some bikes also have a large nut on the flat fork on one side of the axle. In this case, the nut must also be tightened. loose. Then turn the chain adju...Read more -
Why can’t chain drive be used in rapid reverse transmission?
The radius of the crankset should be increased, the radius of the flywheel should be reduced, and the radius of the rear wheel should be increased. This is how today’s geared bicycles are designed. The chain drive is composed of main and driven sprockets mounted on parallel axes and an annu...Read more -
How to know the chain specifications and models
1. Measure the pitch of the chain and the distance between the two pins. 2. Inner section width, this part is related to the thickness of the sprocket. 3. The thickness of the chain plate to know whether it is reinforced type. 4. The outer diameter of the roller, some conveyor chains use large ro...Read more -
Double row roller chain specifications
The specifications of double-row roller chains mainly include chain model, number of links, number of rollers, etc. 1. Chain model: The model of double-row roller chain usually consists of numbers and letters, such as 40-2, 50-2, etc. Among them, the number represents the wheelbase of the chain,...Read more -
Chain load calculation formula
The chain load-bearing calculation formula is as follows: Lifting chain meter weight calculation formula? Answer: The basic formula is number of segments = total length (mm) ÷ 14. 8 mm = 600 ÷ 14. 8 = 40. 5 (segments) Weight of each segment = What is the calculation formula for the tensile force ...Read more -
How to measure chain size
Use a caliper or screw micrometer to measure the chain center distance, which is the distance between adjacent pins on the chain. Measuring the chain size is important because different models and specifications of chains have different sizes, and choosing the incorrect chain may cause chain brea...Read more -
How do I know the chain specifications and model?
1. Measure the pitch of the chain and the distance between the two pins; 2. The width of the inner section, this part is related to the thickness of the sprocket; 3. The thickness of the chain plate to know whether it is a reinforced type; 4. The outer diameter of the roller, some conveyor chains...Read more -
Calculation method of chain specifications
Chain length accuracy should be measured according to the following requirements A. The chain is cleaned before measurement B. Wrap the chain under test around the two sprockets. The upper and lower sides of the chain under test should be supported. C. The chain before measurement should stay for...Read more -
Can engine oil be used on bicycle chains?
Can engine oil be used on bicycle chains? The answer is as follows: It is best not to use car engine oil. The operating temperature of automobile engine oil is relatively high due to engine heat, so it has relatively high thermal stability. But the bicycle chain temperature is not very high. The...Read more -
What should I do if the front derailleur of my newly purchased mountain bike is scratched?
The mountain bike front derailleur chain needs to be adjusted. The specific steps are as follows: 1. First adjust the H and L positioning. First, adjust the chain to the outermost position (if it is 24 speed, adjust it to 3-8, 27 speed to 3-9, and so on). Adjust the H screw of the front derailleu...Read more -
What are the main parameters of roller chain transmission? How to choose reasonably?
a: The pitch and number of rows of the chain: The larger the pitch, the greater the power that can be transmitted, but the unevenness of motion, dynamic load, and noise also increase accordingly. Therefore, under the condition of meeting the load-carrying capacity, small-pitch chains should be us...Read more
